ATTACK DPX LAMBDA Instrukcja Obsługi Strona 26
- Strona / 51
- Spis treści
- BOOKMARKI
Oceniono. / 5. Na podstawie oceny klientów
26
is guaranteed for maximum moisture content of 20%. Guarantee expires at boiler operation with
cut wood with humidity over 20%.
Energy content of mostly used kinds of wood
Wood Thermal capacity per1 kg
kcal MJ kWh
Spruce 3900 16,25 4,5
Pine 3800 15,80 4,4
Birch 3750 15,50 4,3
Oak 3600 15,10 4,2
Beech 3450 14,40 4,0
Assembly and installation of the boiler
Boiler installation
Boiler can be installed only by person with valid certificate for installation and assembly of heat
technology devices. The project in conformity with valid prescriptions has to be made out for
installation. Before installation of boiler, the assembly worker has to check all data given in the
production label for their conformity with data in the project and attached documentation. Boiler
connection has to be in conformity with valid prescriptions, norms, regulations and this manual for
attendance.
Producer is not responsible for damages caused by faulty connection, respectively by
incorrect operation.
Placing of boiler
Boiler is designed for installation and operation in the premises with basic enviroment (AA5/AB5)
under STN 33 2000-3. For the installation it is necessary to keep safe distance of its surface from
flammable materials by the degree of flammability and combustibility:
- from materials of flammability B, C1 a C2 200mm
- from materials of flammability C3 400mm
- from materials with degree of flammability not tested by STN 73 0853 400mm
Examples of building material devided by the degree of flammability:
- degree A non-combustible (bricks, blocks,ceramic linings, morter, plaster)
- degree B partially flammable (heraklith, lignos, boards from bazalt felt)
- degree C1 very difficult to ignite (broadleaves - beech, oak; plywood, werzalit, hard paper)
- degree C2 intermediate flammable (coniferous species -wood, pine, spruce pulpboard, solodur)
- degree C3 easy flammable (wood pulpboards, polyurethane, PVC, foam rubber, styrofoam)
Non-combustible board or protecting fire- screen ( on the protected subject) must exceed the boiler
dimensions for at least 300mm. All the other subjects from combustible materials, which are
situated near the boiler, have to be protected by non-combustible board or fire-screen, if it is
impossible to keep the safe distance.
If the boiler is located on the floor from combustible materials, the floor must be covered with the
non-combustible, thermal insulating pad exceeding the boiler planview for at least 100mm on the
side with feeding door and ash door . All the solid materials of "A" degree of combustibility can be
used as a fireproof thermal insulation.
If the boiler is placed in the boiler room, there must be a free space of min.1 meter in front of the
boiler and of 0,5m from the side walls and from the rear side. Above the boiler there must be a free
- ATTACK DPX 1
- Manual content: 4
- Introduction: 5
- Technical parameters: 6
- Instrument panel 8
- ATTACK DPX PROFI 9
- ATTACK DPX LAMBDA 10
- Purpose of usage 11
- Technical description 11
- Operation prescriptions 11
- Attention 11
- Fuel shortage 14
- Boiler overheating 15
- Error messages 15
- Combustion regulation 16
- Test of device 19
- Safety test 19
- Setting 19
- ATTENTION! 27
- Boiler protection against 28
- Connection schemes 32
- Liquidation of packaging 34
- Accessories 35
- Overheating (warning) 38
- Probe warming 45
- Grounding of covering 46
- Network cord 46
- Producer: 51
Powiązane produkty i podręczniki dla Grzejniki wodne i kotły ATTACK DPX LAMBDA
(16 strony)
(58 strony)De Dietrich FWPC_FWPS_FWS_FWP Handbücher
Bedienungsanleitungen und Benutzerhandbücher für Wasserkocher De Dietrich FWPC_FWPS_FWS_FWP.
Wir stellen 1 PDF-Handbücher De Dietrich FWPC_FWPS_FWS_FWP zum kostenlosen herunterladen nach Dokumenttypen zur Verfügung Bedienungsanleitung
Komentarze do niniejszej Instrukcji